|
|
| Acceso al texto completo restringido a Biblioteca INIA Tacuarembó. Por información adicional contacte bibliotb@tb.inia.org.uy. |
Registro completo
|
Biblioteca (s) : |
INIA Tacuarembó. |
Fecha : |
22/10/2014 |
Actualizado : |
04/05/2020 |
Tipo de producción científica : |
Artículos en Revistas Indexadas Internacionales |
Autor : |
VOTE, D.J.; BOWLING, M.B.; CUNHA, B.C.N.; BELK, K.E.; TATUM, J.D.; MONTOSSI, F.; SMITH, G.C. |
Afiliación : |
D.J. VOTE, Cargill Meat Solutions, United States; M.B. BOWLING, Center for Meat Safety and Quality, Department of Animal Sciences, Colorado State University, United States; B.C.N. CUNHA, Minerva Ltd., Sao Paulo, Brazil; K.E. BELK, Center for Meat Safety and Quality, Department of Animal Sciences, Colorado State University, United States; J.D. TATUM, Center for Meat Safety and Quality, Department of Animal Sciences, Colorado State University, United States; FABIO MARCELO MONTOSSI PORCHILE, Instituto Nacional de Investigación Agropecuaria (INIA), Uruguay; G.C. SMITH, Center for Meat Safety and Quality, Department of Animal Sciences, Colorado State University, United States. |
Título : |
Video image analysis as a potential grading system for Uruguayan beef carcasses. |
Fecha de publicación : |
2009 |
Fuente / Imprenta : |
Journal of Animal Science, Volume 87, Issue 7, July 2009, Pages 2376-2390.DOI: https://doi.org/10.2527/jas.2009-1791 |
DOI : |
10.2527/jas.2009-1791 |
Idioma : |
Inglés |
Notas : |
Article history: Received January 12, 2009; Accepted March 26, 2009. Corresponding author: keith.belk@colostate.edu |
Contenido : |
Abstract: A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison with use of current INAC grades. Use of VIA to sort carcasses according to muscle color would allow for the marketing of more consistent beef products with respect to tenderness. This would help facilitate the initiation of a value-based marketing system for the Uruguayan beef industry. MenosAbstract: A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output va... Presentar Todo |
Palabras claves : |
INSTRUMENT GRADING; URUGUAYAN BEEF; VIDEO IMAGE ANALYSIS. |
Thesagro : |
CARNE; URUGUAY. |
Asunto categoría : |
L01 Ganadería |
Marc : |
LEADER 03208naa a2200277 a 4500 001 1051246 005 2020-05-04 008 2009 bl uuuu u00u1 u #d 024 7 $a10.2527/jas.2009-1791$2DOI 100 1 $aVOTE, D.J. 245 $aVideo image analysis as a potential grading system for Uruguayan beef carcasses. 260 $c2009 500 $aArticle history: Received January 12, 2009; Accepted March 26, 2009. Corresponding author: keith.belk@colostate.edu 520 $aAbstract: A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison with use of current INAC grades. Use of VIA to sort carcasses according to muscle color would allow for the marketing of more consistent beef products with respect to tenderness. This would help facilitate the initiation of a value-based marketing system for the Uruguayan beef industry. 650 $aCARNE 650 $aURUGUAY 653 $aINSTRUMENT GRADING 653 $aURUGUAYAN BEEF 653 $aVIDEO IMAGE ANALYSIS 700 1 $aBOWLING, M.B. 700 1 $aCUNHA, B.C.N. 700 1 $aBELK, K.E. 700 1 $aTATUM, J.D. 700 1 $aMONTOSSI, F. 700 1 $aSMITH, G.C. 773 $tJournal of Animal Science, Volume 87, Issue 7, July 2009, Pages 2376-2390.DOI: https://doi.org/10.2527/jas.2009-1791
Descargar
Esconder MarcPresentar Marc Completo |
Registro original : |
INIA Tacuarembó (TBO) |
|
Biblioteca
|
Identificación
|
Origen
|
Tipo / Formato
|
Clasificación
|
Cutter
|
Registro
|
Volumen
|
Estado
|
Volver
|
|
Registro completo
|
Biblioteca (s) : |
INIA Tacuarembó. |
Fecha actual : |
13/09/2016 |
Actualizado : |
17/04/2017 |
Tipo de producción científica : |
Trabajos en Congresos/Conferencias |
Autor : |
DEL CAMPO, M.; BRITO, G.; CORREA, D.; BORCA, A.; TOYOS, G.; ALBIN, F.; SAN JULIÁN, R.; ROBAINA, R. |
Afiliación : |
MARCIA DEL CAMPO GIGENA, INIA (Instituto Nacional de Investigación Agropecuaria), Uruguay; GUSTAVO WALTER BRITO DIAZ, INIA (Instituto Nacional de Investigación Agropecuaria), Uruguay; DANIELA CORREA; AUGUSTO BORCA, National Meat Institute, Uruguay.; GUSTAVO TOYOS, National Meat Institute, Uruguay.; FRANCISCO ALBIN, National Meat Institute, Uruguay.; ROBERTO SAN JULIAN SANCHEZ, INIA (Instituto Nacional de Investigación Agropecuaria), Uruguay; RICARDO ROBAINA, National Meat Institute, Uruguay. |
Título : |
Uruguayan National Beef Quality Audit-2013: A Survey of beef industry related to quality and value of cattle. |
Fecha de publicación : |
2016 |
Fuente / Imprenta : |
In: International Congress of Meat Science and Technology, Meat for Global Sustainability, 62., 14-19th August 2016, Bangkok, Thailand. |
Idioma : |
Inglés |
Contenido : |
The Uruguayan Beef Quality Audit evaluates the industry efforts to improve beef quality every 5 years. The third was held between April and December 2013 in 10 packing plants, assesing breed-type, brands, horn and mud/manure, bruises, offal and carcass condemnation and carcass quality. Breed-types were mainly Hereford [39.4%), British crosses (17.8%) and Aberdeen Angus (25.6%). Most cattle had no mud/manure on their hides (87.1%). Only 70.9% of the cattle had horns but 71% of carcasses were bruised, and Type 2 doubled the incidence registered in 2007 (28 vs 14%). Sex-classes were: steer (61%), heifer (6%) and cow (33%). Considering only steers, permanent incisor number distribution were zero: 2.7%, two: 15.5%), four: 21.4% and more than four: 60.4%. Hot carcass weight was 255 kg in average and fat thickness 0.93 cm. Dark-cutters were 9% showing a slight improvement (11% in 2007). Overall maturities were mainly A (45.8%) and B (29.9%). Marbling score was mainly Slight (49%) and most of the steers were in Standard (34.7%) and Select (23.3%) USDA quality grade. This information helps the Uruguayan beef industry to assesses progress on different production issues that affect beef consumer demands, to promote and priorize future training and research activities. |
Palabras claves : |
CARCASS; MEAT GRADE; SURVEYS. |
Thesagro : |
CALIDAD DE LA CARNE; CARNE; URUGUAY. |
Asunto categoría : |
L01 Ganadería |
URL : |
http://www.ainfo.inia.uy/digital/bitstream/item/6004/1/DEL-CAMPO-2016.pdf
|
Marc : |
LEADER 02101nam a2200265 a 4500 001 1055621 005 2017-04-17 008 2016 bl uuuu u01u1 u #d 100 1 $aDEL CAMPO, M. 245 $aUruguayan National Beef Quality Audit-2013$bA Survey of beef industry related to quality and value of cattle.$h[electronic resource] 260 $aIn: International Congress of Meat Science and Technology, Meat for Global Sustainability, 62., 14-19th August 2016, Bangkok, Thailand.$c2016 520 $aThe Uruguayan Beef Quality Audit evaluates the industry efforts to improve beef quality every 5 years. The third was held between April and December 2013 in 10 packing plants, assesing breed-type, brands, horn and mud/manure, bruises, offal and carcass condemnation and carcass quality. Breed-types were mainly Hereford [39.4%), British crosses (17.8%) and Aberdeen Angus (25.6%). Most cattle had no mud/manure on their hides (87.1%). Only 70.9% of the cattle had horns but 71% of carcasses were bruised, and Type 2 doubled the incidence registered in 2007 (28 vs 14%). Sex-classes were: steer (61%), heifer (6%) and cow (33%). Considering only steers, permanent incisor number distribution were zero: 2.7%, two: 15.5%), four: 21.4% and more than four: 60.4%. Hot carcass weight was 255 kg in average and fat thickness 0.93 cm. Dark-cutters were 9% showing a slight improvement (11% in 2007). Overall maturities were mainly A (45.8%) and B (29.9%). Marbling score was mainly Slight (49%) and most of the steers were in Standard (34.7%) and Select (23.3%) USDA quality grade. This information helps the Uruguayan beef industry to assesses progress on different production issues that affect beef consumer demands, to promote and priorize future training and research activities. 650 $aCALIDAD DE LA CARNE 650 $aCARNE 650 $aURUGUAY 653 $aCARCASS 653 $aMEAT GRADE 653 $aSURVEYS 700 1 $aBRITO, G. 700 1 $aCORREA, D. 700 1 $aBORCA, A. 700 1 $aTOYOS, G. 700 1 $aALBIN, F. 700 1 $aSAN JULIÁN, R. 700 1 $aROBAINA, R.
Descargar
Esconder MarcPresentar Marc Completo |
Registro original : |
INIA Tacuarembó (TBO) |
|
Biblioteca
|
Identificación
|
Origen
|
Tipo / Formato
|
Clasificación
|
Cutter
|
Registro
|
Volumen
|
Estado
|
Volver
|
Expresión de búsqueda válido. Check! |
|
|